Effective Graffiti-Resistant Coating System
Graffgo AG is usually applied in one coat although some surfaces may require a non-darkening sealer.
It is a single part system, simply open the can and brush it on, with no mixing required.
Graffgo is an easy to apply coating that is also environmentally friendly.
Graffgo AG can be used anywhere and on any surface. Just wash any graffiti away with water and no ghosted image will remain.
With Graffgo AG applied to the desired surface, graffiti, stickers and posters can be cleaned off with just water, so no detergents required. This new and exciting product development clearly gives both financial and environmental benefits. It will even bond to marble.
A British coating that is in use worldwide.
One-Coat Application
See how easy it is to apply Graffgo/Nu-Guard AG in this demonstration video.
Effortless Graffiti Removal
Video demonstrating easy cleaning of graffiti and marker penusing only water.
About Graffgo AG
The Graffgo AG coating range comprises unique anti-graffiti fire safety rated (BS 476 Part 6: 1998 + A1 2009. Class 0) coatings that protect all surfaces, including marble, brick, concrete, render, stone, wood, plastic and more against all types of graffiti and poster glues.
Engineered and manufactured in the UK, this market leading anti-graffiti coating range delivers the most vandal-resistant finish ever achieved anywhere in the world.
Don’t believe us? Then call or email us for a demonstration.
A Highly cost-effective solution
A Graffgo AG coated surface will save a huge amount of time and money in a graffiti prone area – and anyone can apply it because we have engineered it that way.
Depending on the precise duty, Graffgo AG carries a guarantee of up to 15 years. Graffgo AG is being specified and used for all types of anti-graffiti situations in industries such as railway, infrastructure, building services and construction on a worldwide basis, with new clients coming on board each month.
Want a piece of the action?
TECHNICAL INFORMATION
Reference Graffgo AG Anti-Graffiti Coating
Purpose A one pack single coat permanent non-sacrificial coating giving excellent protection against fly poster and graffiti attack. The product allows easy repeated removal of graffiti by using water/detergent
Colour Clear and Pigmented Liquid
Application Apply by brush, roller, convention or airless spray
Volume Solids 78% Matt; 78% Gloss; 58% Pigmented
Recommended Film Thickness DFT to be determined by Specialist Coatings International depending on substrate and porosity, normally between 90 to 110 DFT
Coverage Rate Theoretical 8 to 10 square metres/litre
Drying Time Touch dry 3 / 4 hours; full cure 24 hours. Recoating (if required) time 3 to 4 hours
Thinners/Brushwash Disposal
Weight Per Litre .90-1.02
Flash Point Above 64 Degrees Centigrade
V.O.C. 50 grams per litre
Finish Gloss – Semi Matt
Application Temperature -5 Degrees Centigrade +60 Degrees Centigrade
Surface Preparation All surfaces must be clean and dry, remove any soiling by power wash etc. Any soiling/graffiti apparent on painted surfaces i.e. masonry /rendered walls should be re-painted with good quality masonry exterior paint, prior to application. Non-Darkening Primer should be applied prior to top coat on all sandstone/brick surfaces.
Product Details
| Type: | Anti-Graffiti Protective Coating |
| Data Sheet: | Download Technical |
| Quantities: | 5 Litre, 25 Litre, 1000 Litre |
| Coverage: | Up to 10 sq/m per litre per coat |
Purchase
Click the button below to purchase from our online store.
Purchase